CASE C16 · US ·
布鲁克林陆军码头：翻新前对电梯井和机电管井进行无人机扫描
在由 NYCEDC 翻新的 Brooklyn Army Terminal，电梯井和机电（MEP）竖井由带保护笼的 LiDAR 无人机扫描。只需在墙上开一个小口，数据采集用了一天、八次飞行。未量化节省，来源为制造商文章。
| 业主 | New York City Economic Development Corporation (NYCEDC) |
| 服务商 | Gedeon GRC Consulting; MFE Inspection Solutions |
| 地点 | Brooklyn, New York, United States |
| 机型 | Flyability Elios 3 with Surveying Payload |
| 传感器 | LiDAR, 4K camera |
引入前
绳索作业和受限空间进入，需要在墙上开一个 8×10 ft 的开口，很可能需要数天。
引入无人机后
切出一个 2×2 ft 的开口，让无人机飞入每个竖井；LiDAR 数据被合并到建筑扫描中。
成果
| 指标 | 数值 | 依据 |
|---|---|---|
| data collection | 1 day, 8 flights, under 25 minutes per location | 报告值 |
| access opening | 2×2 ft instead of 8×10 ft | 报告值 |
| cost | not quantified | 报告值 |
注意事项与局限
- Manufacturer case study; year not stated; savings not quantified.
- Cutting the wall was the slowest step; large shafts needed a second flight; point clouds needed alignment in separate software.
来源
- Inspecting Elevator Shafts with the Elios 3 in New YorkFlyability 已读全文
来源已核对: 2026-10-22