CASE C18 · AU ·
澳大利亚燃煤电厂：紧急停机期间对 25 个炉膛燃烧器进行无人机检查
澳大利亚服务商 Drone Elevation 在一座燃煤电厂紧急停机期间，用带保护笼的无人机检查了25个炉膛燃烧器。目视检查后只需拆除9个燃烧器，据称节省了300多小时。制造商文章内部的数字前后不一致。
| 业主 | Government-owned coal power plant (not named) |
| 服务商 | Drone Elevation |
| 地点 | Australia |
| 机型 | Flyability Elios 3 |
| 传感器 | 4K camera, laser scanner (LiDAR), UT payload (use on this job unclear) |
引入前
每个燃烧器拆下检查：每个燃烧器约 24 小时，由两个 5 人班组完成；总计最多 600 小时；受限空间进入每天最高 5,000 澳元。
引入无人机后
无人机飞入炉膛检查陶瓷砖、旋流器积垢和耐火材料，因此只需拆下确有必要的燃烧器。
成果
| 指标 | 数值 | 依据 |
|---|---|---|
| burner removals | 9 of 25 needed removal; 16 removals (24 h each) avoided | 报告值 |
| hours saved | over 300 hours (conclusion says 384 hours) | 报告值 |
| confined-entry cost avoided | up to AUD 5,000 per entry (no total given) | 报告值 |
注意事项与局限
- Manufacturer case study; plant, location and year not named; hours saved are inconsistent (300 vs 384).
- Unclear whether UT readings were taken; 9 burners still had to be removed.
- The 'inspection started without cooling wait' benefit is stated qualitatively.
来源
来源已核对: 2026-10-22